Wash. Admin. Code § 296-150I-0330 - Requirements for temporary placement of manufactured homes
Manufactured homes placed on temporary display or in storage by a manufacturer, dealer or distributor in excess of thirty days shall be:
(1) Supported under each main
frame beam by supports located within two feet of each end and within four feet
of the front and rear axle and other supports so that no span shall exceed
sixteen feet;
(2) Made weather
tight at any marriage line joint at the roof and wall lines; and
(3) In addition to subsections (1) and (2) of
this section, manufactured homes in storage or on display longer than ninety
days must also be supported at each centerline column and along each rim joist
at the manufacturer's identified support points.
Notes
Statutory Authority: Chapter 43.22A RCW and 2007 c 432. 08-12-040, § 296-150I-0330, filed 5/30/08, effective 6/30/08.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.