Wash. Admin. Code § 296-304-16001 - General
(1) Except as noted
in WAC 296-304-13001 and as provided in
exemptions under WAC
296-304-15001(9),
certification performed by accredited persons must conform to the requirements
contained in this section.
(2) Safe
working loads assigned to assembled units of gear must be based on applicable
design criteria acceptable to the accredited person . Where no design data on
which to base a rating is obtainable, the safe working load ratings assigned
must be based on the owner's information and warranty that those so assigned
are correct. Unit test certificates must state the basis for any such safe
working load assignment.
Notes
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 07-03-163, § 296-304-16001, filed 1/24/07, effective 4/1/07; Order 74-25, § 296-304-16001, filed 5/7/74.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.