W. Va. Code R. § 7-1-6 - Engineering Registration and Certification; Designations of Nonpracticing Status of Former Registrants
6.1.
Classifications of Registration. The Board shall register or certify a
qualified applicant under one of the following classifications, of which only a
professional engineer is qualified to practice or offer to practice engineering
in West Virginia:
6.1.a. Professional
Engineer;
6.1.b. Engineer Intern;
or
6.1.c. Professional
Engineer-Retired.
6.2.
Professional Engineer.
6.2.a. PE Registration
Numbers. The Board shall assign each successful applicant a registration
number. Numbers are issued consecutively in the order in which an applicant is
authorized to obtain a seal. The Board shall advise the successful applicant of
his or her number.
6.2.b. The Board
shall grant an applicant authorization to obtain a seal who has met all the
requirements of the W.Va. Code §30-13 and rules promulgated under this
Code as they pertain to education, experience, and upon passing the required FE
and PE examinations.
6.2.c.
Certificates of Registration. The Board shall issue a certificate of
registration and similar wallet card to an applicant who has met the
requirements of this state and who has submitted a copy of a satisfactory West
Virginia PE seal and has paid the certificate fee prescribed in §
7-1-13.4. The certificate signed by the Board members shall show the
registrant's registration number and seal of the Board.
6.2.d. Replacement of Certificate. The
registrant shall notify the Board when a certificate of registration is lost,
destroyed or mutilated, and, if the registrant is in good standing, the Board
shall replace it, upon presentation of a statement of the loss and the
prescribed fee in § 7-1-13.4.
6.3. Engineer Intern.
6.3.a. EI Certification Numbers. The Board
shall assign each EI a certification number at the time certification is
granted by the Board. Numbers are issued consecutively in the order in which an
applicant is granted certification. The Board shall advise the EI of his or her
number.
6.3.b. The Board shall
grant an applicant who has met all the requirements of the W.Va. Code
§30-13 and rules promulgated under this Code as they pertain to education,
experience, and upon passing the required FE examination, a certificate of
certification to serve as an EI in West Virginia.
6.3.c. Certificates of Certification. The
Board shall issue a certificate of certification and similar wallet card to an
applicant who has met the requirements of this state and who has paid all fees.
The certificate signed by the Board members shall show the EI's certification
number and seal of the Board.
6.3.d. Replacement of Certificate. The EI
shall notify the Board when a certificate of certification is lost, destroyed
or mutilated, and, if the EI is in good standing, the Board shall replace it,
upon presentation of a statement of the loss and the prescribed fee in §
7-1-13.4.
6.4.
Professional Engineer-Retired.
6.4.a.
Registration Numbers. The Board shall reserve the original assigned
registration number for any PE who elects to convert to Professional
Engineer-Retired status. This number will remain on file in the event that the
retired engineer should chose to reinstate his or her PE registration in
accordance with § 7-1-9.3 and § 7-1-10.10 of these rules.
6.4.b. Documentation of Retired Status. The
Board shall issue an appropriate wallet card to an applicant who has met the
requirements of this state and who has paid appropriate fees.
6.4.c. PE-Retired status is a nonpracticing
status. Registrants who elect PE-Retired status must retire their seal and
certify that they are no longer receiving remuneration from providing
professional engineering services.
6.5. Updated Information. It is the EI's or
PE's responsibility to notify the Board within thirty days of any change in
information previously submitted to the Board, such as name change, change of
address, change of employer, or similar matter requiring current information.
6.6 Other designations of nonpracticing
status. In addition to a retired status or revoked status, the Board recognizes
the following additional designations, all of which describe a type of
nonpracticing status which does not qualify the former registrant to practice
or offer to practice engineering in the state of West Virginia:
6.6.a. Professional engineer - Inactive. An
active PE or PE-Retired may elect to re-designate his or her status to
Professional Engineer-Inactive upon application for inactive status which
states that he or she is no longer practicing or offering to practice
engineering in this state for remuneration and may seek reinstatement to active
status only in accordance with § 7-1-9.3 and § 7-1-10.10 of these
rules.
6.6.b. Professional engineer
- Lapsed. A PE who has not renewed his or her active status in accordance with
§ 7-1-9.2 of these rules or has not applied for a re-designation to
retired or inactive status shall be re-designated by the Board to Professional
Engineer-Lapsed without further action by the Board and may seek reinstatement
to active status only in accordance with § 7-1-9.3 and § 7-1-10.10 of
these rules.
6.6.c. Professional
Engineer - Invalidated. A PE who is unable to provide sufficient proof that any
condition of renewal set forth in W. Va. Code §
30-13-1
et seq. or these rules has been met shall be re-designated by
the Board to Professional Engineer-Invalidated without further action by the
Board and may seek reinstatement to active status only in accordance with
§ 7-1-9.3 and § 7-1-10.10 of these rules.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.