027-9 Wyo. Code R. §§ 9-8 - Value Engineering

(a) Value engineering is a process to achieve the best balance of cost-to-value in projects for districts and the State. In addition to value engineering required by design or construction contracts, the Department shall conduct a value engineering analysis using a collaborative process to objectively consider the best approach to design and construct projects in accordance with Section 12(d) of this Chapter. Value engineering shall include life cycle cost analysis of all major systems in the facility.

(i) Value engineering review shall occur at the schematic design phase (10% Design and the design documents phase (35% Design) or as otherwise determined by the Department. The design of the facility shall conform to value engineering recommendations before it proceeds into the next phase of development unless waived in writing by the Director or by action of the Commission pursuant to Chapter 2 § 3(a)(v) of these Rules.

(ii) Value engineering strategies learned on previous projects shall be considered for subsequent projects.

Notes

027-9 Wyo. Code R. §§ 9-8

Adopted, Eff. 1/15/2020. Amended, Eff. 2/2/2022.