The operator of a facility who is required to report
under section
95101 of this article, and who is
not eligible for abbreviated reporting under section
95103(a), must
comply with Subpart N of 40 CFR Part 98 (§§
98.140 to
98.148) in reporting stationary
combustion and process emissions and related data from glass production to ARB,
except as otherwise provided in this section.
(a) CO
2
from
Fossil Fuel Combustion. When calculating CO
2
emissions from fuel combustion, the operator must use a method in
40 CFR §
98.33(a)(1) to §
98.33(a)(4) as
specified by fuel type in section
95115 of this article.
(b)
Monitoring, Data and
Records. For each emissions calculation method chosen under section
95116(a), the
operator must meet the applicable requirements for monitoring, missing data
procedures, data reporting, and records retention that are specified in
40 CFR §
98.34 to §
98.37, except as modified in
sections
95115,
95116(c)-(d), and
95129 of this article.
(c)
Missing Data Substitution
Procedures. The operator must comply with
40 CFR §
98.145 when estimating missing data, except
as otherwise provided in paragraphs (1)-(3) below.
(1) To substitute for missing data for
emissions reported under section
95115 of this article (stationary
combustion units and units using continuous emissions monitoring systems), the
operator must follow the requirements of section
95129 of this article.
(2) For each missing value of the monthly
amounts of carbonate-based raw materials charged to any continuous glass
melting furnace, the operator must apply a substitute value according to the
procedures in paragraphs (A)-(B) below.
(A) If
the data capture rate is at least 80 percent for the data year, the operator
must substitute for each missing value according to
40 CFR §
98.145(a).
(B) If the data capture rate is less than 80
percent for the data year, the operator must substitute for each missing value
with the maximum short tons per day raw material capacity of the continuous
glass melting furnace.
(3) The operator must document and retain
records of the procedure used for all missing data estimates pursuant to the
recordkeeping requirements of section
95105.
(d)
Additional Product Data.
In addition to the information required by
40 CFR §
98.146, the operator must report the
additional parameters provided in paragraphs (1)-(3) below whether or not a
CEMS is used to measure CO
2 emissions.
(1) The operator of a flat glass
manufacturing facility must report the annual quantity of glass pulled from the
melting furnace (short tons).
(2)
The operator of a container glass manufacturing facility must report the annual
quantity of glass pulled from the melting furnace (short tons).
(3) The operator of a fiberglass
manufacturing facility must report the annual quantity of glass pulled from the
melting furnace (short tons).
Notes
Cal. Code
Regs. Tit. 17, §
95116
1. New
section filed 12-14-2011; operative 1-1-2012 pursuant to Government Code
section
11343.4
(Register 2011, No. 50).
2. Amendment of subsection (c) filed
12-31-2013; operative 1-1-2014 pursuant to Government Code section
11343.4(b)(3)
(Register 2014, No. 1).
Note: Authority cited: Sections
38510,
38530,
39600,
39601,
39607,
39607.4
and
41511,
Health and Safety Code. Reference: Sections
38530,
39600
and
41511,
Health and Safety Code.
1. New section
filed 12-14-2011; operative 1-1-2012 pursuant to Government Code section
11343.4
(Register 2011, No. 50).
2. Amendment of subsection (c) filed
12-31-2013; operative 1-1-2014 pursuant to Government Code section
11343.4(b)(3)
(Register 2014, No. 1).