The operator of a facility who is required to report
under section
95101(a)(1)(B)
(8.) of this article, and who is not eligible for abbreviated reporting under
section 95103(a), must
comply with Subpart R of 40 CFR Part 98 (§§
98.180 to
98.188) in reporting stationary
combustion and process emissions and related data from lead production to ARB,
except as otherwise provided in this section.
(a)
CO2 from
Fossil Fuel Combustion. When calculating CO
2
emissions from fossil fuel combustion at a stationary combustion unit under
40 CFR §
98.182(d), the operator must
use a method in 40 CFR
§
98.33(a)(1) to §
98.33(a)(4) as
specified by fuel type in section
95115 of this article.
(b)
Monitoring, Data and
Records. For each emissions calculation method chosen under section
95124(a), the
operator must meet the applicable requirements for monitoring, missing data
procedures, data reporting, and records retention that are specified in
40 CFR §
98.34 to §
98.37, except as modified in
sections
95115,
95118(c)-(d), and
section
95129 of this article.
(c)
Missing Data Substitution
Procedures. The operator must comply with
40 CFR §
98.185 when substituting for missing data,
except as otherwise provided in paragraphs (1)-(3) below.
(1) To substitute for missing data for
emissions reported under section
95115 of this article (stationary
combustion units and units using continuous emissions monitoring systems), the
operator must follow the requirements of section
95129 of this article.
(2) If the annual mass or carbon content of
carbon-containing inputs are missing when using the process emissions
calculation procedure in 40
CFR §
98.183(b)(2), the
operator must apply substitute values according to the procedures in paragraphs
(A)-(B) below.
(A) If the analytical data
capture rate is at least 80 percent for the data year, the operator must
substitute for each missing value according to
40 CFR §
98.185(a) and the number of
days per month.
(B) If the
analytical data capture rate is less than 80 percent for the data year, the
operator must substitute for each missing value with the maximum capacity of
the system and the number of days per month.
(3) The operator must document and keep
records of the procedures used for estimating missing data pursuant to the
recordkeeping requirements of section
95105.
(d)
Additional Product Data.
The operator of a lead production, recycling, recovery, or manufacturing
facility must report production of lead and lead alloys during the data year
(short tons).
Notes
Cal. Code
Regs. Tit. 17, §
95124
1. New
section filed 12-31-2013; operative 1-1-2014 pursuant to Government Code
section
11343.4(b)(3)
(Register 2014, No. 1).
2. Amendment of subsections (c), (c)(2)(A)
and (d) filed 12-31-2014; operative 1-1-2015 pursuant to Government Code
section
11343.4(b)(3)
(Register 2015, No. 1).
Note: Authority cited: Sections
38510,
38530,
39600,
39601,
39607,
39607.4
and
41511,
Health and Safety Code. Reference: Sections
38530,
39600
and
41511,
Health and Safety Code.
1. New
section filed 12-31-2013; operative 1-1-2014 pursuant to Government Code
section 11343.4(b)(3) (Register 2014, No. 1).
2. Amendment of
subsections (c), (c)(2)(A) and (d) filed 12-31-2014; operative
1/1/2015 pursuant to
Government Code section
11343.4(b)(3)
(Register
2015, No. 1).