Cal. Code Regs. Tit. 19, § 756 - Equipment Standards Operation and Tests
(a)
General. The construction details and electrical features, the test for
performance, electrical manufacturing and production tests, and the marking of
equipment designed for use in a household fire warning system shall conform
with the provisions of NFPA 72 National Fire Alarm Code as amended in
California Code of Regulations, Title 24, Part 9, Chapter 47, except as
otherwise provided in these regulations.
(b) Control Equipment. In addition to the
provisions of Section
756, household fire warning
control units shall conform to the following:
(1) Each electrical fire warning system
control unit shall have a self-restoring test button or other means to permit
the householder to check the system.
(2) An AC operated control unit shall be
provided with a visible "power on" indicator.
(3) Control units having primary operating
power supplied from a monitored battery shall be capable of producing an alarm
signal for at least four minutes at the battery voltage at which a trouble
signal is normally obtained followed by seven days of trouble signal
operation.
(4) The loss or
restoration of primary AC power shall not cause an alarm signal.
(5) For control units having a primary
operating power supplied from a monitored battery employing a lock-in alarm
feature, automatic transfer is required from alarm to a trouble condition. If a
control unit does not have a lock-in feature, automatic transfer from alarm to
trouble is not required.
(c) Single or Multiple Station Alarm Devices.
Units containing within a single enclosure, the detector, control equipment,
the alarm and trouble sounding device(s) operated from an external or internal
power supply shall conform to Section
756 and the following:
(1) For a unit employing a lock-in alarm
feature, automatic transfer is required from alarm to a trouble condition. If a
unit does not have a lock-in feature, automatic transfer from alarm to trouble
is not required.
(2) A unit having
primary operating power supplied from a monitored battery shall be capable of
producing an alarm signal for at least four minutes at the battery voltage at
which a trouble signal is normally obtained followed by seven days of trouble
signal operation.
Notes
Note: Authority cited: Sections 13114 and 13144.4, Health and Safety Code. Reference: Sections 13100- 13146.5, Health and Safety Code.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.