Fla. Admin. Code Ann. R. 62-296.511 - Solvent Metal Cleaning
(1)
Applicability.
(a) The emission limiting
standards and control technology set forth in Rule
62-296.511, F.A.C., shall apply
to cold cleaning, open-top vapor degreasing, and conveyorized degreasing
operations. All degreasing facilities using the following halogenated solvents
are subject to the requirements (including compliance deadlines) of the
national emission standard for halogenated solvent degreasers at 40 C.F.R. Part
63, Subpart T, adopted and incorporated by reference in Rule
62-204.800, F.A.C.: carbon
tetrachloride, chloroform, tetrachloroethylene, 1, 1, 1-trichloroethane,
trichloroethylene, and methylene chloride. Until compliance is achieved with
the requirements of 40 C.F.R. Part 63, Subpart T, existing (as of November 29,
1993) halogenated solvent degreasing facilities must also comply with the
requirements of this rule. The requirements of this rule shall not apply to any
halogenated solvent degreasing facility after it has achieved compliance with
the requirements of 40 C.F.R. Part 63, Subpart T.
(b) The provisions of Rule
62-296.511, F.A.C., shall apply
with the following exceptions:
1. Open-top
vapor degreasers with an open area smaller than 10.8 square feet (one square
meter) shall be exempt from paragraph
62-296.511(3)(c),
F.A.C.,
2. Conveyorized degreasers
with an air/vapor interface smaller than 21.5 square feet (2.0 square meters)
shall be exempt from paragraph
62-296.511(4)(b),
F.A.C.
(2) Cold
Cleaning Control Technology. Except as provided under subsection
62-296.511(1),
F.A.C., the owner or operator of a cold cleaning facility shall comply with
each of the following requirements:
(a) Equip
the cleaner with a cover. The cover shall be so designed that it can be easily
operated with one hand if:
1. The solvent
volatility is greater than 0.3 pounds per square inch (15 millimeters of
mercury or 2 kilopascals) measured at 100 degrees Fahrenheit (38 degrees
Celsius),
2. The solvent is
agitated,
3. The solvent is
heated.
(b) Equip the
cleaner with a facility for draining cleaned parts. The drainage facility shall
be constructed internally so that parts are enclosed under the cover while
draining if the solvent volatility is greater than 0.6 pounds per square inch
(31 millimeters of mercury or 4.1 kilopascals) measured at 100 degrees
Fahrenheit (38 degrees Celsius), except that the drainage facility may be
external for the applications where an internal type cannot fit into the
cleaning system.
(c) Install one of
the following control devices if the solvent volatility is greater than 0.6
pounds per square inch (31 millimeters of mercury or 4.1 kilopascals) measured
at 100 degrees Fahrenheit (38 degrees Celsius), or if the solvent is heated
above 120 degrees Fahrenheit (50 degrees Celsius):
1. Freeboard that gives a freeboard ratio
greater than or equal to 0.7, or
2.
Water cover (solvent must be insoluble in and heavier than water), or
3. Other systems of equivalent control such
as refrigerated chiller or carbon absorption.
(d) Provided a permanent, conspicuous label
summarizing the operating requirements.
(e) Store waste solvent only in covered
containers and not dispose of waste solvent or transfer it to another party,
such that greater than 20 percent of the waste solvent (by weight) can
evaporate into the atmosphere.
(f)
Close the cover whenever parts are not being handled in the cleaner.
(g) Drain the cleaned parts for at least 15
seconds or until dripping ceases.
(h) If used, supply a solvent spray that is a
solid fluid stream (not a fine, atomized, or shower-type spray) at a pressure
which does not cause excessive splashing.
(3) Open Top Vapor Degreaser Control
Technology. Except as provided under Rule
62-296.511, F.A.C., the owner or
operator of an open top vapor degreaser shall comply with each of the following
requirements:
(a) Equip the vapor degreaser
with a cover that can be opened and closed easily without disturbing the vapor
zone.
(b) Provide the following
safety switches:
1. A condenser flow switch
and thermostat which shut off the heat if the condenser coolant is either not
circulating or too warm; and,
2. A
spray safety switch which shuts off the spray pump if the vapor level drops
more than 4 inches (10 centimeters) below the bottom condenser coil; and,
3. A vapor level control
thermostat which shuts off the heat when the vapor level rises too
high.
(c) Install one of
the following control devices:
1. A freeboard
ratio greater than or equal to 0.75, and a powered or mechanically assisted
cover if the degreaser opening is greater than 10.8 square feet (1.0 square
meter), or
2. Refrigerated chiller,
or
3. An enclosed design (cover or
door opens only when the dry part is actually entering or exiting the
degreaser), or
4. A carbon
adsorption system, with ventilation greater than or equal to 50 cubic feet per
minute per square foot (15 cubic meters per minute per square meter) of
air/vapor area (when cover is open), and exhausting less than 25 parts per
million of solvent averaged over one complete adsorption
cycle.
(d) Keep the cover
closed at all times except when processing work loads through the
degreaser.
(e) Minimize solvent
carryout by:
1. Racking parts to allow
complete drainage; and,
2. Moving
parts in and out of the degreaser at less than 11 feet per minute (3.3 meters
per minute); and,
3. Holding the
parts in the vapor zone at least 30 seconds or until condensation ceases; and,
4. Decanting any pools of solvent
on the cleaned parts before removal from the vapor zone; and,
5. Allowing parts to dry within the degreaser
for at least 15 seconds or until visually dry.
(f) Not degrease porous or absorbent
materials, such as cloth, leather, wood, or rope.
(g) Not occupy more than half of the
degreaser's open-top area with a workload.
(h) Not load the degreaser to the point where
the vapor level would drop more than 4 inches (10 centimeters) below the bottom
condenser coil when the workload is removed from the vapor zone.
(i) Always spray below the vapor
level.
(j) Repair solvent leaks
immediately, or shut down the degreaser.
(k) Store waste solvent only in covered
containers and not dispose of waste solvent or transfer it to another party,
such that greater than 20 percent of the waste solvent (by weight) can
evaporate into the atmosphere.
(l)
Not operate the cleaner so as to allow water to be visually detectable in
solvent exiting the water separator.
(m) Not use ventilation fans near the
degreaser opening, nor provide exhaust ventilation exceeding 66 cubic feet per
minute per square foot (20 cubic meters per minute per square meter) of
degreaser open area, unless necessary to meet OSHA requirements.
(n) Provide a permanent, conspicuous label,
summarizing the operating procedure of paragraphs
62-296.511(3)(d) through
(l), F.A.C.
(4) Conveyorized Degreaser Control
Technology. Except as provided under subsection
62-296.511(1),
F.A.C., the owner or operator of a conveyorized degreaser shall comply with the
following requirements:
(a) Not use work-place
fans near the degreaser opening, nor provide exhaust ventilation exceeding 66
cubic feet per minute per square foot (20 cubic meters per minute per square
meter) of degreaser opening, unless necessary to meet Occupational Safety and
Health Administration (OSHA) requirements. OSHA regulations are available from
the Superintendent of Documents, U.S. Government Printing Office, Washington,
D.C., and may be inspected at the Department's Tallahassee office.
(b) Install one of the following control
devices:
1. Refrigerated chiller, or
2. Carbon absorption system, with ventilation
greater than or equal to 49 cubic feet per minute per square foot (15 cubic
meters per square meter) of air/vapor area (when downtime covers are open), and
exhausting less than 25 parts per million of solvent by volume averaged over a
complete absorption cycle.
(c) Equip the cleaner with equipment, such as
a drying tunnel or rotating (tumbling) basket, sufficient to prevent cleaned
parts from carrying out solvent or liquid vapor.
(d) Provide the following safety switches:
1. A condenser flow switch and thermostat
which shut off the sump heat if the condenser coolant is either not circulating
or too warm; and,
2. A spray safety
switch which shuts off the spray pump or the conveyor if the vapor level drops
more than 4 inches (10 centimeters) below the bottom condenser coil;
and,
3. A vapor level control
thermostat which shuts off the heat when the vapor level rises too
high.
(e) Minimize
openings during operation so that entrances and exits will silhouette workloads
with an average clearance between the parts and the edge of the degreaser
opening of less than 4 inches (10 centimeters) or less than 10 percent of the
width of the opening.
(f) Provide
downtime covers for closing off the entrance and exit during shutdown
hours.
(g) Minimize carryout
emissions by:
1. Racking parts for best
drainage; and,
2. Maintaining the
vertical conveyor speed at less than 11 feet per minute (3.3 meters per
minute).
(h) Store waste
solvent only in covered containers and not dispose of waste solvent or transfer
it to another party, such that greater than 20 percent of the waste solvent (by
weight) can evaporate into the atmosphere.
(i) Repair solvent leaks immediately, or shut
down the degreaser.
(j) Not operate
the cleaner so as to allow water to be visually detectable in solvent exiting
the water separator.
(k) Place
downtime covers over entrances and exits of conveyorized degreasers immediately
after the conveyors and exhausts are shutdown and do not remove them until just
before a startup.
(5)
Test Methods and Procedures. All emissions tests performed pursuant to the
requirements of this rule shall comply with the following requirements.
(a) The test method for volatile organic
compound emissions from the specified equipment shall be EPA Method 21, as
described at 40 C.F.R. Part 60, Appendix A-7, adopted and incorporated by
reference at Rule 62-204.800, F.A.C.
(b) The test method for non-halogenated
organic solvent emissions from a destructive add-on control device shall be EPA
Method 25, as described at 40 C.F.R. Part 60, Appendix A-7, adopted and
incorporated by reference at Rule
62-204.800, F.A.C., or
Attachment 3 of EPA 450/2-78-041, Alternate Test Method for Direct Measurement
of Total Gaseous Organic Compounds Using a Flame Ionization Analyzer, adopted
and incorporated by reference in Chapter 62-297, F.A.C.
(c) The test method for organic solvent
emissions from a non-destructive add-on control device shall be VOC Capture
Efficiency Test Procedures as described at Rule
62-297.450, F.A.C. The sampling
time for each capture efficiency test run shall be at least 8 hours, unless
otherwise approved by the Department pursuant to Rule
62-297.620, F.A.C.
(d) Test procedures shall meet all applicable
requirements of Chapter 62-297, F.A.C.
Notes
Rulemaking Authority 403.061, 403.8055 FS. Law Implemented 403.021, 403.031, 403.061, 403.087 FS.
Formerly 17-2.650(1)(f)12., 17-296.511, Amended 11-23-94, 1-1-96, 6-25-96, 10-7-96, 7-10-14, 11-5-20.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
(1) Applicability.
(a) The emission limiting standards and control technology set forth in Rule 62-296.511, F.A.C., shall apply to cold cleaning, open-top vapor degreasing, and conveyorized degreasing operations. All degreasing facilities using the following halogenated solvents are subject to the requirements (including compliance deadlines) of the national emission standard for halogenated solvent degreasers at 40 C.F.R. Part 63, Subpart T, adopted and incorporated by reference in Rule 62-204.800, F.A.C.: carbon tetrachloride, chloroform, tetrachloroethylene, 1, 1, 1-trichloroethane, trichloroethylene, and methylene chloride. Until compliance is achieved with the requirements of 40 C.F.R. Part 63, Subpart T, existing (as of November 29, 1993) halogenated solvent degreasing facilities must also comply with the requirements of this rule. The requirements of this rule shall not apply to any halogenated solvent degreasing facility after it has achieved compliance with the requirements of 40 C.F.R. Part 63, Subpart T.
(b) The provisions of Rule 62-296.511, F.A.C., shall apply with the following exceptions:
1. Open-top vapor degreasers with an open area smaller than 10.8 square feet (one square meter) shall be exempt from paragraph 62-296.511(3)(c), F.A.C.,
2. Conveyorized degreasers with an air/vapor interface smaller than 21.5 square feet (2.0 square meters) shall be exempt from paragraph 62-296.511(4)(b), F.A.C.
(2) Cold Cleaning Control Technology. Except as provided under subsection 62-296.511(1), F.A.C., the owner or operator of a cold cleaning facility shall comply with each of the following requirements:
(a) Equip the cleaner with a cover. The cover shall be so designed that it can be easily operated with one hand if:
1. The solvent volatility is greater than 0.3 pounds per square inch (15 millimeters of mercury or 2 kilopascals) measured at 100 degrees Fahrenheit (38 degrees Celsius),
2. The solvent is agitated,
3. The solvent is heated.
(b) Equip the cleaner with a facility for draining cleaned parts. The drainage facility shall be constructed internally so that parts are enclosed under the cover while draining if the solvent volatility is greater than 0.6 pounds per square inch (31 millimeters of mercury or 4.1 kilopascals) measured at 100 degrees Fahrenheit (38 degrees Celsius), except that the drainage facility may be external for the applications where an internal type cannot fit into the cleaning system.
(c) Install one of the following control devices if the solvent volatility is greater than 0.6 pounds per square inch (31 millimeters of mercury or 4.1 kilopascals) measured at 100 degrees Fahrenheit (38 degrees Celsius), or if the solvent is heated above 120 degrees Fahrenheit (50 degrees Celsius):
1. Freeboard that gives a freeboard ratio greater than or equal to 0.7, or
2. Water cover (solvent must be insoluble in and heavier than water), or
3. Other systems of equivalent control such as refrigerated chiller or carbon absorption.
(d) Provided a permanent, conspicuous label summarizing the operating requirements.
(e) Store waste solvent only in covered containers and not dispose of waste solvent or transfer it to another party, such that greater than 20 percent of the waste solvent (by weight) can evaporate into the atmosphere.
(f) Close the cover whenever parts are not being handled in the cleaner.
(g) Drain the cleaned parts for at least 15 seconds or until dripping ceases.
(h) If used, supply a solvent spray that is a solid fluid stream (not a fine, atomized, or shower-type spray) at a pressure which does not cause excessive splashing.
(3) Open Top Vapor Degreaser Control Technology. Except as provided under Rule 62-296.511, F.A.C., the owner or operator of an open top vapor degreaser shall comply with each of the following requirements:
(a) Equip the vapor degreaser with a cover that can be opened and closed easily without disturbing the vapor zone.
(b) Provide the following safety switches:
1. A condenser flow switch and thermostat which shut off the heat if the condenser coolant is either not circulating or too warm; and,
2. A spray safety switch which shuts off the spray pump if the vapor level drops more than 4 inches (10 centimeters) below the bottom condenser coil; and,
3. A vapor level control thermostat which shuts off the heat when the vapor level rises too high.
(c) Install one of the following control devices:
1. A freeboard ratio greater than or equal to 0.75, and a powered or mechanically assisted cover if the degreaser opening is greater than 10.8 square feet (1.0 square meter), or
2. Refrigerated chiller, or
3. An enclosed design (cover or door opens only when the dry part is actually entering or exiting the degreaser), or
4. A carbon adsorption system, with ventilation greater than or equal to 50 cubic feet per minute per square foot (15 cubic meters per minute per square meter) of air/vapor area (when cover is open), and exhausting less than 25 parts per million of solvent averaged over one complete adsorption cycle.
(d) Keep the cover closed at all times except when processing work loads through the degreaser.
(e) Minimize solvent carryout by:
1. Racking parts to allow complete drainage; and,
2. Moving parts in and out of the degreaser at less than 11 feet per minute (3.3 meters per minute); and,
3. Holding the parts in the vapor zone at least 30 seconds or until condensation ceases; and,
4. Decanting any pools of solvent on the cleaned parts before removal from the vapor zone; and,
5. Allowing parts to dry within the degreaser for at least 15 seconds or until visually dry.
(f) Not degrease porous or absorbent materials, such as cloth, leather, wood, or rope.
(g) Not occupy more than half of the degreaser's open-top area with a workload.
(h) Not load the degreaser to the point where the vapor level would drop more than 4 inches (10 centimeters) below the bottom condenser coil when the workload is removed from the vapor zone.
(i) Always spray below the vapor level.
(j) Repair solvent leaks immediately, or shut down the degreaser.
(k) Store waste solvent only in covered containers and not dispose of waste solvent or transfer it to another party, such that greater than 20 percent of the waste solvent (by weight) can evaporate into the atmosphere.
(l) Not operate the cleaner so as to allow water to be visually detectable in solvent exiting the water separator.
(m) Not use ventilation fans near the degreaser opening, nor provide exhaust ventilation exceeding 66 cubic feet per minute per square foot (20 cubic meters per minute per square meter) of degreaser open area, unless necessary to meet OSHA requirements.
(n) Provide a permanent, conspicuous label, summarizing the operating procedure of paragraphs 62-296.511(3)(d) through (l), F.A.C.
(4) Conveyorized Degreaser Control Technology. Except as provided under subsection 62-296.511(1), F.A.C., the owner or operator of a conveyorized degreaser shall comply with the following requirements:
(a) Not use work-place fans near the degreaser opening, nor provide exhaust ventilation exceeding 66 cubic feet per minute per square foot (20 cubic meters per minute per square meter) of degreaser opening, unless necessary to meet Occupational Safety and Health Administration (OSHA) requirements. OSHA regulations are available from the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C., and may be inspected at the Department's Tallahassee office.
(b) Install one of the following control devices:
1. Refrigerated chiller, or
2. Carbon absorption system, with ventilation greater than or equal to 49 cubic feet per minute per square foot (15 cubic meters per square meter) of air/vapor area (when downtime covers are open), and exhausting less than 25 parts per million of solvent by volume averaged over a complete absorption cycle.
(c) Equip the cleaner with equipment, such as a drying tunnel or rotating (tumbling) basket, sufficient to prevent cleaned parts from carrying out solvent or liquid vapor.
(d) Provide the following safety switches:
1. A condenser flow switch and thermostat which shut off the sump heat if the condenser coolant is either not circulating or too warm; and,
2. A spray safety switch which shuts off the spray pump or the conveyor if the vapor level drops more than 4 inches (10 centimeters) below the bottom condenser coil; and,
3. A vapor level control thermostat which shuts off the heat when the vapor level rises too high.
(e) Minimize openings during operation so that entrances and exits will silhouette workloads with an average clearance between the parts and the edge of the degreaser opening of less than 4 inches (10 centimeters) or less than 10 percent of the width of the opening.
(f) Provide downtime covers for closing off the entrance and exit during shutdown hours.
(g) Minimize carryout emissions by:
1. Racking parts for best drainage; and,
2. Maintaining the vertical conveyor speed at less than 11 feet per minute (3.3 meters per minute).
(h) Store waste solvent only in covered containers and not dispose of waste solvent or transfer it to another party, such that greater than 20 percent of the waste solvent (by weight) can evaporate into the atmosphere.
(i) Repair solvent leaks immediately, or shut down the degreaser.
(j) Not operate the cleaner so as to allow water to be visually detectable in solvent exiting the water separator.
(k) Place downtime covers over entrances and exits of conveyorized degreasers immediately after the conveyors and exhausts are shutdown and do not remove them until just before a startup.
(5) Test Methods and Procedures. All emissions tests performed pursuant to the requirements of this rule shall comply with the following requirements.
(a) The test method for volatile organic compound emissions from the specified equipment shall be EPA Method 21, as described at 40 C.F.R. Part 60, Appendix A-7, adopted and incorporated by reference at Rule 62-204.800, F.A.C.
(b) The test method for non-halogenated organic solvent emissions from a destructive add-on control device shall be EPA Method 25, as described at 40 C.F.R. Part 60, Appendix A-7, adopted and incorporated by reference at Rule 62-204.800, F.A.C., or Attachment 3 of EPA 450/2-78-041, Alternate Test Method for Direct Measurement of Total Gaseous Organic Compounds Using a Flame Ionization Analyzer, adopted and incorporated by reference in Chapter 62-297, F.A.C.
(c) The test method for organic solvent emissions from a non-destructive add-on control device shall be VOC Capture Efficiency Test Procedures as described at Rule 62-297.450, F.A.C. The sampling time for each capture efficiency test run shall be at least 8 hours, unless otherwise approved by the Department pursuant to Rule 62-297.620, F.A.C.
(d) Test procedures shall meet all applicable requirements of Chapter 62-297, F.A.C.
Notes
Rulemaking Authority 403.061, 403.8055 FS. Law Implemented 403.021, 403.031, 403.061, 403.087 FS.
Formerly 17-2.650(1)(f)12., 17-296.511, Amended 11-23-94, 1-1-96, 6-25-96, 10-7-96, 7-10-14, 11-5-20.