(1) Applicability. The emission limitations
and other requirements of Rule
62-296.712, F.A.C., shall apply
to miscellaneous manufacturing process operations for which a specific RACT
emission limitation has not been established in Rules
62-296.401 through
62-296.415, F.A.C., or
62-296.701 through
62-296.711, F.A.C., including
but not limited to such operations as heat treating furnaces, waste heat
evaporators, corebaking ovens, mixing kettles, blast furnaces, puddling
furnaces, dryers, stills, roasters, and all other methods or forms of
manufacturing or processing which emit particulate matter.
(2) Emission Limitations. No owner or
operator of a miscellaneous manufacturing process operation shall cause,
permit, or allow emissions of particulate matter in excess of 0.03 gr/dscf, or
any visible emissions greater than 5 percent opacity. However the owner or
operator may exceed these emission limits if he utilizes a pollution control
device or system for control of particulate matter which has an actual
particulate matter collection efficiency of at least 98 percent.
If Rule
62-296.712, F.A.C., is the least
restrictive standard, the opacity standard for the emissions unit shall be the
average opacity level achieved during the initial compliance test which
establishes compliance with the standard, plus 5 percent
opacity.
(3) Test Methods
and Procedures. All emissions tests performed pursuant to the requirements of
this rule shall comply with the following requirements.
(a) The test method for visible emissions
shall be EPA Method 9, as described at 40 C.F.R. Part
60, Appendix A-4, adopted
and incorporated by reference at Rule
62-204.800, F.A.C.
(b) The test method for particulate matter
emissions shall be EPA Method 5, as described at 40 C.F.R. Part
60, Appendix
A-3, adopted and incorporated by reference at Rule
62-204.800, F.A.C. The minimum
sample volume shall be 30 dry standard cubic feet.
(c) A visible emissions test indicating no
visible emissions (5 percent opacity) may be submitted in lieu of a particular
stack test for materials handling emissions subject to this rule, where the
emissions unit is equipped with a baghouse.
(d) Test procedures shall meet all applicable
requirements of Chapter 62-297, F.A.C.
Notes
Fla. Admin. Code Ann. R. 62-296.712
Rulemaking Authority
403.061 FS. Law Implemented
403.021,
403.031,
403.061,
403.087
FS.
Formerly 17-2.650(2)(c) 12., 17-296.712, Amended
11-23-94, 1-1-96, Amended by
Florida
Register Volume 40, Number 122, June 24, 2014 effective
7/10/2014.
Formerly 17-2.650(2)(c)12., 17-296.712, Amended 11-23-94,
1-1-96, 7-10-14.