Idaho Admin. Code r. 02.02.14.351 - BIODIESEL
Identification and labeling requirements for
01.
Identification of
Product. Biodiesel and biodiesel blends must be identified by the
capital letter B followed by the numerical value representing the volume
percentage of biodiesel fuel. (Examples: B10, B20, B100). (3-15-22)
02.
Labeling of Retail
Dispensers. Each retail dispenser of biodiesel or biodiesel blend
containing more than five percent (5%) must be labeled with the capital letter
B followed by the numerical value representing the volume percentage of
biodiesel fuel and ending with the either "biodiesel " or "biodiesel blend."
(Examples: B10 biodiesel , B20 biodiesel blend). (3-15-22)
a. The label must have letters in bold face
block not less than one-half (1/2) inch high, with the lettering clearly
legible on a contrasting background. (3-15-22)
b. The label must be displayed on both faces
of the dispenser on the upper one-half (1/2) of the dispenser as near the unit
price display as practical. (3-15-22)
03.
Documentation for Dispenser
Labeling Purposes. (3-15-22)
a. The
retailer must be provided a declaration of the volume percent of the biodiesel
on an invoice, bill of lading, shipping paper, or other document, at the time
of delivery of the fuel. (3-15-22)
b. This documentation is for dispenser
labeling purposes only; it is the responsibility of any potential blender to
determine the amount of biodiesel in the diesel fuel prior to blending.
(3-15-22)
04.
Exemption. Biodiesel blends containing five percent (5%) or less
biodiesel by volume are exempted from the requirements of Section
351 of this rule.
(3-15-22)
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.