Ill. Admin. Code tit. 35, § 703.202 - Tank Systems
Except as otherwise provided in 35 Ill. Adm. Code 724.290, the owner or operator of a facility that uses tanks to store or treat hazardous waste must provide the following additional information:
a) A written assessment that is reviewed and
certified by a qualified Professional Engineer as to the structural integrity
and suitability for handling hazardous waste of each tank system, as required
under 35 Ill. Adm. Code
724.291
and
724.292;
b) Dimensions and capacity of each
tank;
c) Description of feed
systems, safety cutoff, bypass systems, and pressure controls (e.g.,
vents);
d) A diagram of piping,
instrumentation, and process flow for each tank system;
e) A description of materials and equipment
used to provide external corrosion protection, as required under 35 Ill. Adm.
Code
724.292(a)(3)(B);
f) For new tank systems, a detailed
descriptions of how the tank systems will be installed in compliance with 35
Ill. Adm. Code
724.292(b),
(c), (d), and (e);
g) Detailed plans and description of how the
secondary containment system for each tank system is or will be designed,
constructed, and operated to meet the requirements of 35 Ill. Adm. Code
724.293(a),
(b), (c), (d), (e), and (f);
h) For tank systems for which alternative
design and operating practices are sought pursuant to 35 Ill. Adm. Code
724.293(g),
the following:
1) Detailed plans and
engineering and hydrogeologic reports, as appropriate, describing alternate
design and operating practices that will, in conjunction with location aspects,
prevent the migration of any hazardous waste or hazardous constituents into the
groundwater or surface water during the life of the facility,
2) A detailed assessment of the substantial
present or potential hazards posed to human health or the environment should a
release enter the environment, or
3) A copy of the petition for alternative
design and operating practices or, if such have already been granted, a copy of
the Board order granting alternative design and operating practices;
i) Description of controls and
practices to prevent spills and overflows, as required under 35 Ill. Adm. Code
724.294(b);
j) For tank systems in which ignitable,
reactive or incompatible wastes are to be stored or treated, a description of
how operating procedures and tank system and facility design will achieve
compliance with the requirements of 35 Ill. Adm. Code
724.298
and
724.299;
and
k) Information on air emission
control equipment, as required in Section
703.213.
Notes
Amended at 32 Ill. Reg. 11672, effective July 14, 2008
BOARD NOTE: Derived from 40 CFR 270.16(2007).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.