312 IAC 29-20-14 - Well completion and recompletion reports
Authority: IC 14-10-2-4; IC 14-37-3
Affected: IC 14-37
Sec. 14.
(a) Within
thirty (30) days after the conclusion of drilling, redrilling, or completion
operations, an owner or operator shall filedrilling and well completion
information on a form prescribed by the division that will include the
following:
(1) The name and location of the
well.
(2) A directional survey if
the well is a directional or horizontal well.
(3) Information on the construction of the
well.
(4) Information on the
producing zones and the type of stimulation or treatment performed on each
zone.
(5) A log or record of all
strata encountered during drilling or deepening including a description of the
geologic names and depths of the formations encountered.
(6) The results of all drill stem
tests.
(7) Initial production
information.
(8) Two (2) copies of
all open hole wireline or geophysical logs run on the well.
(9) The cement job log required under section
9 of this rule.
(b) Upon
request by the division, if core samples are taken, the owner or operator shall
do the following:
(1) Provide at least a
forty-eight (48) hour advanced notice to the Indiana geological survey before
commencing the coring of any well drilled for oil and gas purposes.
(2) Provide the cuttings and core samples to
the Indiana geological survey.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.