312 IAC 29-28-1 - Operating requirements for a Class II well
Authority: IC 14-10-2-4; IC 14-37-3
Affected: IC 14-37
Sec. 1.
(a) An owner
or operator shall obtain written authorization from the division under this
rule to operate a Class II well. (b) Written authorization to inject shall be
issued after the owner or operator has submitted to the division the following:
(1) A completion report showing the well has
been constructed as a Class II well in accordance with the permit issued under
312 IAC 29-5.
(2) An analysis of the injection fluid in
accordance with section 7 of this rule.
(3) Certification that the well meets the
requirements for external mechanical integrity under section 4 of this rule,
verified by either of the following:
(A)
Cement tickets.
(B) Other measures
specified in section 4(c)(1) through 4(c)(6) of this rule.
(4) Certification that the well has passed an
internal mechanical integrity test in accordance with section 2 of this
rule.
(c) The division
director may require additional testing or special equipment if appropriate to
the protection of an underground source of drinking water.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.