329 IAC 10-35-2 - Preoperational requirements
Authority: IC 13-14-8-7; IC 13-15-2-1; IC 13-19-3-1
Affected: IC 13-30-2; IC 36-9-30
Sec. 2.
(a) Before
beginning operation, owners or operators of a restricted waste site Type III
shall be required to establish a series of identifiable boundary markers that
will delineate the approved facility boundaries and solid waste boundaries for
the life of the facility.
(b)
Before beginning operation, owners or operators of construction/demolition
sites shall be required to complete the following:
(1) Establish a series of identifiable
boundary markers that will delineate the approved facility boundaries and solid
waste boundaries for the life of the facility.
(2) Complete initial site development and
construction in accordance with the initial facility development plan required
in 329 IAC 10-32 and complete other preoperational requirements imposed as
conditions to the facility permit.
(3) Establish permanent, on-site benchmark or
benchmarks with vertical, mean sea level elevation, and horizontal control so
that no portion of the proposed fill area is further than one thousand (1,000)
feet from a benchmark. However, distances greater than the specified one
thousand (1,000) feet may be allowed where necessary to avoid the placement of
benchmarks on filled areas.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.