675 IAC 30-6-1 - Compliance with ASME code; special designs

Authority: IC 22-13-2-8

Affected: IC 22-13-2-11; IC 22-15-6

Sec. 1.

(a) No boiler, except an existing installation of a boiler to be reinstalled or one exempted by 675 IAC 30-1-2, shall be installed in this state on or after July 1, 1953, unless it conforms with the edition of the ASME B&PVC in effect when the boiler was designed or constructed. A boiler installed on or after January 5, 1996 that requires an ASME B&PVC manufacturer's data report shall be registered with the NBBI.

(b) Each reinstalled or secondhand boiler shall be installed in accordance with the requirements of Part 1 of the NBIC, as referenced in 675 IAC 30-1-1.

(c) Where a boiler of special design does not comply with the adopted standards in 675 IAC 30-1-1, its construction must be approved in accordance with the variance procedure established in IC 22-13-2-11.

(d) A boiler shall not be operated until a valid operating permit is issued, as required by 675 IAC 30-39.

Notes

675 IAC 30-6-1

Fire Prevention and Building Safety Commission; 675 IAC 30-6-1; filed Jan 5, 1996, 10:15 a.m.: 19 IR 1126; readopted filed Jul 9, 2001, 1:33 p.m.: 24 IR 3822; readopted filed Sep 21, 2007, 9:16 a.m.: 20071010-IR-680070389RFA; readopted filed Oct 19, 2007, 1:08 p.m.: 20071114-IR-680070389RFA; readopted filed Sep 5, 2013, 10:09 a.m.: 20131009-IR-680130182RFA; readopted filed 9/4/2019, 2:20 p.m.: 20191002-IR-675190336RFA Filed 4/28/2021, 11:03 a.m.: 20210526-IR-675200627FRA, eff 7/1/2021

Transferred from the Boiler and Pressure Vessel Rules Board ( 680 IAC 2-6-1) to the Fire Prevention and Building Safety Commission (675 IAC 30-6-1) by P.L. 249-2019, SECTION 15, effective July 1, 2019.