Kan. Admin. Regs. § 4-10-1a - Prohibited acts

It shall be a violation to perform any of the following:

(a) Install, relocate, modify, repair, or use any system or equipment for storing, reacting, transferring, transporting, applying, or dispersing by any other means anhydrous ammonia unless the system, permanent storage facility, or equipment is in compliance with this article 10;

(b) except as provided under K.A.R. 4-10-4b(b), transfer anhydrous ammonia into a mobile container unless the container bears a legible manufacturer's data plate or equivalent stamp;

(c) deface the manufacturer's data plate or equivalent stamp;

(d) transfer any anhydrous ammonia into a container or system having structural damage or any other defect that would prevent the containment of anhydrous ammonia;

(e) transfer anhydrous ammonia into or out of any container without the consent of the owner of each container;

(f) transfer, or permit the transfer of, anhydrous ammonia into a permanent storage container unless the permanent storage container has a current KDA-issued proof-of-inspection seal attached to the respective system;

(g) conduct non-code welding directly on a container or any parts subject to pressure;

(h) fail to report any release of 100 pounds or more of anhydrous ammonia within 48 hours of the release;

(i) conduct a transfer without an attendant present at the transfer site;

(j) transfer anhydrous ammonia into any vessel that does not comply with K.A.R. 4-10-1 through 4-10-16 ; or

(k) maintain anhydrous ammonia in any vessel that does not meet the requirements of K.A.R. 4-10-1 through 4-10-16 .

Notes

Kan. Admin. Regs. § 4-10-1a

Authorized by and implementing K.S.A. 2-1212; effective March 12, 2010.