Nev. Admin. Code § 459.953455 - Contents of application for permit to construct: Process hazard analysis; information concerning process safety
1. In addition to
any other information required to be included pursuant to NAC 459.95345 to
459.953475, inclusive, an application for a permit to construct must include:
(a) Information relating to the hazards of
any highly hazardous substance or explosive as described in paragraph (a) of
subsection 2 of NAC 459.95412.
(b)
A description of the process chemistry, as required in NAC 459.95412,
including, without limitation, a description of the potential side reactions,
regardless of whether the reactions would create hazardous
consequences.
(c) If not readily
apparent from the piping and instrument diagrams, documentation concerning the
control logic that explains the function of the process controllers, switches
and interlocks. Such documentation must be as concise as possible to allow the
Division to review and use the information efficiently.
(d) A material and energy balance as required
in NAC 459.95412.
(e) A description
of the safety system as required in NAC 459.95412.
(f) A complete process hazard analysis
performed pursuant to NAC 459.95414.
(g) A list of vessels and rotating equipment,
traceable to the piping and instrument diagram, and, if requested by the
Division, design and code information.
2. The process hazard analysis and
information concerning process safety included in an application for a permit
to construct a new process must indicate the current revision number and date
on which that revision was carried out.
Notes
NRS 459.3818, 459.3829
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.