Used oil transporters are subject to all applicable spill
prevention, control and countermeasures ( 40 CFR Part 112 ) in addition to the
requirements of rules
3745-279-40
to
3745-279-47
of the Administrative Code. Used oil transporters are also subject to the
underground storage tank standards(Chapter 1301:7-9 of the Administrative Code)
for used oil stored in underground tanks whether or not the used oil exhibits
any characteristics of hazardous waste, in addition to the requirements of
rules
3745-279-40
to
3745-279-47
of the Administrative Code.
(A)
Applicability. This rule applies to used oil transfer facilities. Used oil
transfer facilities are transportation related facilities including loading
docks, parking areas, storage areas, and other areas where shipments of used
oil are held for more than twenty-four hours during the normal course of
transportation and not longer than thirty-five days. Transfer facilities that
store used oil for more than thirty-five days are subject to regulation under
rules
3745-279-50
to
3745-279-59
of the Administrative Code.
(B)
Storage units. Owners or operators of used oil transfer facilities must store
used oil in tanks, as defined in rule
3745-279-01
of the Administrative Code; in containers, as defined in rule
3745-279-01
of the Administrative Code; or in units subject to regulation under Chapters
3745-54 to 3745-57 and 3745-205 or Chapters 3745-65 to 3745-69 and 3745-256 of
the Administrative Code.
(C)
Condition of units. Containers and aboveground tanks used to store used oil at
transfer facilities must be:
(1) In good
condition (no severe rusting, apparent structural defects or deterioration);
and
(2) Not leaking (no visible
leaks).
(D) Secondary
containment for containers. Containers used to store used oil at transfer
facilities must be equipped with a secondary containment system.
(1) The secondary containment system must
consist of, at a minimum:
(a) Dikes, berms or
retaining walls; and
(b) A floor.
The floor must cover the entire area within the dikes, berms, or retaining
walls; or
(c) An equivalent
secondary containment system.
(2) The entire containment system, including
walls and floors, must be sufficiently impervious to used oil to prevent any
used oil released into the containment system from migrating out of the system
to the soil, ground water, or surface water.
(E) Secondary containment for existing
aboveground tanks. Existing aboveground tanks used to store used oil at
transfer facilities must be equipped with a secondary containment system.
(1) The secondary containment system must
consist of, at a minimum:
(a) Dikes, berms or
retaining walls; and
(b) A floor.
The floor must cover the entire area within the dike, berm, or retaining wall
except areas where existing portions of the tank meet the ground; or
(c) An equivalent secondary containment
system.
(2) The entire
containment system, including walls and floors, must be sufficiently impervious
to used oil to prevent any used oil released into the containment system from
migrating out of the system to the soil, ground water, or surface water.
(F) Secondary
containment for new aboveground tanks. New aboveground tanks used to store used
oil at transfer facilities must be equipped with a secondary containment
system.
(1) The secondary containment system
must consist of, at a minimum:
(a) Dikes,
berms or retaining walls; and
(b) A
floor. The floor must cover the entire area within the dike, berm, or retaining
wall; or
(c) An equivalent
secondary containment system.
(2) The entire containment system, including
walls and floors, must be sufficiently impervious to used oil to prevent any
used oil released into the containment system from migrating out of the system
to the soil, ground water, or surface water.
(G) Labels.
(1) Containers and aboveground tanks used to
store used oil at transfer facilities must be labeled or marked clearly with
the words "Used Oil."
(2) Fill
pipes used to transfer used oil into underground storage tanks at transfer
facilities must be labeled or marked clearly with the words "Used Oil."
(H) Response to
releases. Upon detection of a release of used oil to the environment that is
not subject to the requirements of Chapter 1301:7-9 of the Administrative Code
and which has occurred after October 20, 1998, the owner/operator of a transfer
facility must perform the following cleanup steps:
(1) Stop the release;
(2) Contain the released used oil;
(3) Clean up and manage properly the released
used oil and other materials; and
(4) If necessary, repair or replace any
leaking used oil storage containers or tanks prior to returning them to
service. [Comment: For dates of non-regulatory government publications,
publications of recognized organizations and associations, federal rules, and
federal statutory provisions referenced in this rule, see rule
3745-50-11
of the Administrative Code titled"Incorporated by reference."]