67 Pa. Code § 175.155 - Chassis
(a)
Condition of chassis. All items on the chassis shall be in
safe operating condition as described in §
175.160 (relating to inspection
procedure).
(b)
Vehicle
frame. A vehicle frame shall be in solid condition.
(c)
Seats. A motorcycle
shall be equipped with a seat for the operator which is firmly anchored to the
frame or support. No metal spring shall protrude from the driver's
seat.
(d)
Chain guard or
drive shaft cover. A covering device to prevent contact with a rider
while in a normal riding position shall be provided.
(e)
Stands. A motorcycle
stand shall operate and be strong enough to support the vehicle and stay in the
proper position when not holding the bike in standing position.
(f)
Hand-hold. A hand-hold
device shall be provided if the motorcycle is designed to carry more than one
person.
(g)
Footrests. A motorcycle operated or driven upon the highway
shall have footrests for each person operating or riding upon the
vehicle.
(h)
Highway
bars. If the motorcycle is so equipped, highway bars shall have a
maximum width of 26 inches and shall be located less than 15 inches from the
foot controls and shall not interfere with the operation of foot
controls.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.